Notifications

Dear User,

Dear Buyers,
Sellers Suspended due to non-compliance with GFR Rule 144(xi):
Sellers and Brands listed in the "Sellers Suspended due to non-compliance with GFR Rule 144(xi) " either been determined as non-compliant or have failed to prove their compliance for clause 26 of GTC. till 31.01.2024.
These sellers, the brands owned by them and all the catalogs uploaded by them have been removed from GeM marketplace. These are not eligible for any bid participation on GeM (even through Custom bid and or BOQ bid modes).
Buyers are advised to ensure that they reject such offers received in any bid process form such sellers or other sellers offering products of these brands because of suspension due to noncompliance of GTC clause 26.
GeM reserves the right to cancel such contracts even if placed by the buyer. Buyers are advised to check updated list on regular basis on GeM.
I have gone through the list of Sellers Suspended due to non-compliance with GFR Rule 144(xi). I confirm that I have rejected all such bids which are form such sellers or other sellers offering products of these brands. I understand that this is not an exhaustive listing and I have also done due diligence in respect of remaining sellers for the compliance of GTC clause 26.
Note:
No EMD to be taken from exempt category of sellers even by way of specific clauses mentioned in ATC / STC. Such clauses which are against the GeM GTC, will be treated as null and void.
However, State Government / State Autonomous / State Local Bodies / State PSU / Cooperatives may choose to seek EMD from MSE bidders by specifying the same in ATC / STC of the Bid. In case no such clause is included in ATC / STC, EMD exemption as per para (m) above shall prevail.
Dear Sir/Ma'am,
A technical issue reported in product bids published/drafted since 14th July 2023 9:00 a.m. . The brand name and related information was mentioned in title of the item for the bid created instead of category name of item. Therefore, buyers are advised to cancel such bids and publish fresh bid by 18th July 2023. These bids shall never be treated as PAC bid and they will be brand neutral unless otherwise created as PAC Bid.
Revised IM Policy effective from 1st July'23 - Click here.
Dear Buyer,
Issue of notification regarding OEM / Compatible Cartridge / Consumable (View More)
Some cases have been reported where bidders have claimed non receipt of prior intimation of RA start. In order to ensure that no prospective eligible bidder is left out due to non intimation on time, it has been decide that RA will henceforth start 24 hours after the buyer proceeds for the RA creation and initiated RA. RA Start date and End Date will be notified to both buyer and sellers.
GeM system maintenance activity is planned from 17/06/2023 9:00 PM until 18/06/2023 02:00 PM. While we will work towards avoiding any outages, the system may be unstable intermittently. As a preventive measure, you are requested to either prepone or postpone Bid related activities such as Bid creation, Evaluation, Seek Clarification, Reply Representation and Negotiations etc, to other dates as per your convenience. Also, you may like to avoid keeping Bid end date and Bid Opening dates on or near these dates if feasible.
Please find enclosed OM dated 28.04.2023 on revised format for Registration of bidders from countries sharing land border with India under Rule 144 (xi) for your kind information and necessary action.
Notification regarding Cyber Security Control matrix
Please note that insecure products, solutions, and services lead to exposure to threats and cyber security breaches which affects procuring entities. Assuring cyber security as a feature of products and services require ensuring cyber security compliances as a part of procurement This will also help in building a cyber-security culture. Building awareness in government agencies to adopt cyber security controls as part of the procurement of ICT products and services, as well as engaging industry to put cyber security control requirements into practise, is crucial for meeting the objective of ensuring cyber security.

It is noted that many times due to lack of awareness various clauses, provisions, and guidelines regarding cyber security requirements mandated by MeitY are not being incorporated while making procurements by buyer organisations. In order to give inputs to the procuring authorities regarding these aspects, Indian Computer Emergency Response Team (CERT-In) drafted a discussion paper regarding cyber security control matrix for the procurement of services and solutions by government organisations. The control matrix includes governance and policy, confidentiality, availability, regulatory complexity, audits and situational awareness, data security, application security, and network security. Discussion paper indicates the specification and requirements of different controls as well as indicative methods for verification for each control matrix. A copy of the discussion paper is enclosed herewith.

All the organisations making procurement through GeM are hereby requested to take note of the discussion paper drafted by CERT-In on "Cyber Security Controls Matrix for Procurement of Services and Solutions by Government Organisations ". which is enclosed as Annexure.

It may be noted that procuring entities may select and include appropriate and applicable controls from the control matrix indicated in the discussion paper as a part of their procurement of ICT services and solutions. Procuring entities may also consider adding additional specific controls as per their risk profile and scope of services.

It may also be noted that the adoption of cyber security controls by procuring entities in the procurement process may be kept voluntary (as best practises). However, after a year, based on the outcomes, learning control may be mandated as a part of all ICT-related procurement by government entities.

All buyer organization as well as seller/service providers are requested to note the above.
Push Button Procurement (PBP) functionality enhanced - No need for buyer to certify reasonableness of rates:
GeM has enhanced the Push button Procurement functionality enabled as per DoE OM number F.6/7/2022-PPD dated 11th January 2023. The new guidelines for PBP are as follow:
1. (a) The total procurement value of the specific case may be up to Rs. Five lakhs inclusive of all taxes (No splitting of requirement to be done to bring procurement under this method).
2. (b) This method will be enabled by GeM only for select categories where at least ten sources are listed, and marketplace is sanitized.
3. (c) Once PBP bid is invited on GEM, contract will be placed directly by Gem System without any human intervention i.e., no evaluation or rejection of bids by buyer and without any need for buyer to certify reasonableness of price. Provided conditions as per DoE OM are satisfied, which would be checked by Gem system, - Not by buyer.
4. (d) GeM system would itself check that at least five bids are received (with minimum two Different brands).
5. (e) Individual bidders may quote more than reference price of PBP. GeM system would ensure that order is placed only if lowest price received after PBP is below the GeM marketplace price for identical requirements.
Please refer push button procurement Manual for detailed guidelines. The details of Categories enabled for PBP are available here.
Buyers are advised to comply the latest OM No.F.7/10/2021-PPD (1) dated 23.02.2023 issued by DoE for the restrictions under Rule 144(xi) of the General Financial Rules (GFRs), 2017 while procuring on GeM.
With reference to the clause 4, Section xiii, Sub-section 'm' of GeM GTC, it is to bring to your kind attention that the following categories of Sellers are exempted from furnishing Bid Security:
1. 1. Micro and Small Enterprises who are manufacturer of the Primary Product Category or Service Provider of the Primary Service Category and give specific confirmation to this effect at the time of bid submission and whose credentials are validated online through Udyam Registration / Udyog Aadhaar (as validated by Government from time to time) and through uploaded supporting documents.
2. 2. Start-ups as recognized by Department of Industrial Policy and Promotion (DIPP).
3. 3. KVIC, ACASH, WDO, Coir Board, TRIFED and Kendriya Bhandar.
4. 4. Sellers who have got their credentials verified through the process of Vendor Assessment by Vendor Assessment Agencies for the Primary Product / Primary Service for which Bid / RA has been invited.
5. 5. Sellers/ Service Provider having annual turnover of INR 500 Crore or more, at least in one of the past three completed financial year(s)
6. 6. Micro and Small Enterprises registered with NSIC for the Primary Product Category whose credentials are validated through NSIC database and through uploaded supporting documents.
7. 7. Micro and Small Enterprises registered with DIC for the Primary Product Category whose credentials are validated through DIC database and through uploaded supporting documents.
8. 8. Sellers / Service Providers holding BIS License for the Primary Product Category whose credentials are validated through BIS database and through uploaded supporting documents.
9. 9. Central / State PSUs.
10. 10. Seller / Service Provider registered with designated Agency / Authority as specified in the bid document by the Buyer – such bidder shall have to upload scanned copy of relevant registration document in place of Bid Security document while ] bidding.
Note: No EMD to be taken from exempt category of sellers even by way of specific clauses mentioned in ATC / STC by the Buyers. Such clauses which are against the GeM GTC, will be treated as null and void.
- Get immediate financing through TReDS to pay your MSMEs and show compliance with MSMED Act.
- Benefits of TReDS:
Easy & speedy financing of MSME receivables at highly competitive rates through multiple bank bidding
Uncollateralized finance for Buyers
Assured compliance to MSMED Act, 2006 for making payment to MSMEs as per the Department of Expenditure Payment Order from Goods acceptance date.
Financing period of maximum 180 days.
Automated repayment to financiers on due date through an auto-debit mechanism.
100% digital transactions from anywhere
Lower administration cost for vendor financing, payments, and settlements
How to avail benefits of TReDS?
Not registered with TReDS? Start registration NOW
M1xchange: https://www.m1xchange.comBenefitstoGeMsupplier&Buyer/
Invoicemart: https://www.invoicemart.com/
RXIL: https://rxil.in/Registration-Benefits-GeM-Buyer.html
Registered with TReDS? Now, choose payment through TReDS
With reference to the OM No.F.6/1/2023-PPD dated 06.01.2023, from Dept. of Expenditure, the minimum service charges for the commission based Manpower Outsourcing services has been revised to 3.85%. Procuring entities can also fix the service charges above 3.85% with proper justification on file, wherever required. However, such service charges should not exceed 7% in any case. It is also recommended to use the Least Cost Selection (LCS) especially in High Value Bids, the template for which can be assessed on this link.
DPIIT has issued OM P-45014/33/2021-BE-II (E-64737) dated December 20th, 2022 related to common examples of "Restrictive and discriminatory conditions against the local suppliers" and "Other conditions which make the bid non compliant to PPP-Mll Order''. Buyers are advised to comply with the same and ensure that their tenders are compliant with PPP-MII Order and don't include restrictive and discriminatory conditions against the local suppliers.
Single packet bid has been enabled on GeM and buyers can procure using it. In single packet bidding both technical and financial offerings are being opened simultaneously and buyers evaluate both financial and technical offers simultaneously and publish the evaluation results. Please refer to the user manual for details.
Additional disclaimer and recommendation for buyers for procurement of Drugs/Medicine through Custom/BOQ bids:
All Provisions of Drugs and Cosmetics Act, 1940 and Rules made there under as amended till date will always be applicable. This will include all notifications issued by Central Drugs Standard Control Organisation (CDSCO), Ministry of Health & Family Welfare (MoHFW) and Department of Pharmaceuticals (DOP), Ministry of Chemicals & Fertilizers from time to time in this regard.

The sellers are registered on GeM based on self-declaration of valid Drug License, product certification, test reports etc. However, buyers mandatorily check and validate the details at their end for all applicable licenses and certifications e.g., validity and authenticity/genuineness of drug license, product certification, manufacturer certification/licenses, test reports etc.

In case of custom/BOQ bid, it is recommended to take Notarized Undertaking from private drug manufacturers for necessary compliances. (attached format of "Notarized Undertaking")

Only manufacturers for particular drugs/medicine may be eligible to participate in the bid or quote for the drugs/medicine.
The service category “Healthcare Human Resource Outsourcing Service” has been merged with the other existing manpower outsourcing services which are Manpower Outsourcing Services - Minimum Wage and Manpower Outsourcing Services - Fixed Remuneration . Hence, it has been disabled from the market for all new bids. Buyers can hire the healthcare resources from these 2 manpower outsourcing service categories. There will be no impact on already published bids.
GeM has launched the Push button procurement functionality on experimental basis enabling buyer to buy upto 5 lakhs simplifying the procurement process and require minimal intervention from buyer. This is system driven procurement enabled for the limited 50 categories . This has been enabled vide DoE OM number F.6/7/2022-PPD dated 11th January 2023. The buyer may refer the push button procurement manual for further details. The details of categories enabled for PBP is available here. The key guidelines for PBP are as follow
1. (a) PBP will be made only on GeM through bidding (PBP through Direct Purchase, L-1, Custom-bid etc. are not permitted).
2. (b) The total procurement value of the specific case is not to exceed Rupees Five lakhs, inclusive of all taxes.
3. (c) This will be additional method of procurement and procuring entities are free to use or not to use this additional method of procurement.
4. (d) This method can be used only in case of at least five bids are received. In case of less than five bids are received, the procurement is to restart using usual procurement methods.
5. (e) No splitting of requirement is to be done so as to bring procurement under this method.
6. (f) Once bid is invited on GeM, contract will be placed directly by GeM without any human intervention. (Provided condition 3 (d) above is complied.)
7. (g) This method will be permitted by GeM only for such categories, where at least ten sources are listed.
Load Based Bidding
Bids are currently being evaluated on GeM based on the price quoted by the bidder at the time of bid participation. However, there are some use cases when the buyer publishes a bid and expects certain technical and commercial parameters to be used to evaluate the price, resulting in the evaluated price being different from the bidder's offered price.

To capture detailed technical and commercial parameters, GeM has added another feature whereby a buyer can declare the Technical and Commercial Loading Criteria for Bid Evaluation during Bid Creation itself, which will be printed for the bidders' reference in the Bid document.

The selection of the Techno Commercial for Bid Evaluation will be optional for the buyer and the same can be saved as "No," if buyer doesn’t wish to go with the same.

This will be used by the buyer for the limited categories available in the GeM marketplace.

Categories where Load based will be applicable - BIOMASS and types of pumps like HSD, Screw , Fuel, Petrol pump.
Bunching of predefined categories has been enabled now for bidding. Buyer can create bunch bid of items from same category. Buyer can also create bunch bid of items from different categories if such categories are enabled for bunching by GeM. If the item categories that you are trying to bunch are not enabled to be bunched together and you feel that these are items are having same Supplier / OEM base and are required to be bought together and bunching will not lead to restriction in competition, then you may please send an email request to GeM at request-bunch@gem.gov.in for enabling bunching of such categories. Please mention exact name of GeM categories that you are requesting for enabling bunching. Your request would be examined by GeM team and if it is found that such bunching would not lead to restrictive bidding, GeM would enable bunching of those categories. This is a one time exercise and once enabled, all buyers can bunch those categories in all their future bids. Custom and BoQ items are by default enabled to be bunched with other regular categories.
The option of acceptance/ rejection of Direct Purchase/ L1 orders will be discontinued on GeM from 29th July 22 onwards. All the orders placed on GeM shall be auto accepted unless the buyer is red flagged or the order is for a freight intensive item. Only in these cases, the sellers will get an option to Accept/ Reject the order. Even in these cases, the order shall be auto accepted in 5 days if no action is taken by the seller.
The functionality for the collection of interest amount on the delayed payments as per DoE OM No.F.6/18/2019-PPD dated 3rd July 2020 is being made live from 01st August 2022, which would be applicable on all CRAC issued/generated on or after 01st August 2022. If the payment is delayed beyond prescribed timelines, the buyer will be liable to deposit interest as per DoE OM. Interests due showing in the Buyer dashboards for older contracts are being reset to zero and all future interests would have to be paid using online functionality deployed on the GeM using the SBI payment gateway.
Please read DO from CEO GeM regarding misuse of Custom / BoQ based bids.
DP and L-1 purchase for multiple consignee is not allowed. Buyer can add multiple consignees during bid creation.
Bunching of the items has been disabled for Direct Purchase and L1 purchase. For ordering multiple items put the items in separate carts and proceed to checkout in each cart.
GeM is in process to phase out the use of OTP based on authentication process at various stages of procurement like bid floating, bid submissions, invoicing, CRAC generation, Bill process, payment etc. For seamless and hassle-free transition it is advised to get yourself registered for esign or DSC based authentication services and complete all associated formalities. The exact date of disablement of the OTP based authentication will be communicated in near future.
GeM is in a process of development of functionality to deal the statutory variations of contract like GST, VAT etc online. In meantime till such functionality is deployed buyers and sellers are advised to deal variation of taxes OFFLINE at their end with due verification and scrutiny as per enforced tax rates, contract clause and applicable guidelines of organization.
Direct RA is being disabled. Please use BID to RA in place of Direct RA.
Escalation of Tickets – Please raise a ticket while flagging any issue to GeM, it helps better tracking, monitoring, and faster resolution. Further it helps in escalating it to higher level if issue is not resolved within defined timeline. Now tickets can be escalated https://gem.gov.in/gemtickets/create to higher level.
Training for registration and bidding for buyers and sellers - GeM offers self-help trainings for buyers and sellers to register and procure services from the GeM portal without any external help. The link to access these training programs is https://gem.gov.in/training/training_module.
Input Tax Credit - Input Tax Credit and Reverse Charge Mechanism feature in BID has been implemented. Input Tax Credit is required by Buyers who are eligible for Input Tax Credit on GST and GST cess (wherever applicable) in their purchase. Since they get credit of GST therefore, they require financial evaluation of BID considering input tax credit (ITC) so that L1 evaluation is on Net landed Cost to the Buyer. There are three types of sellers in this case. One is regular GST registered seller, unregistered seller and seller registered under composition scheme. This functionality is for all goods and services except services on commission base.
Custom bid and BOQ Bid- GeM strongly recommend use of category based bids - Use of Custom Bid / BoQ bid is not allowed for items for which regular category is available on GeM. Buyer can use the features of Additional parameters also to suit its requirement. Any bid created under Custom / BoQ category shall be cancelled by GeM without any notice, if it is found that regular category is available on GeM for similar items.
Creation of secondary user under different primary user with same mail id: The secondary user registration using an existing email address should be allowed for all the roles - Buyer, Consignee and PAO/DDO.
GeM has revised its Transaction Charge policy. This can be accessed at here
Vaccines and Generic Drugs/Medicine categories - Categories of Vaccines required under the Universal Immunization Program (UIP) of MoHFW have been made live in consultation with them. The categories of TB medicines required under National TB program of MoHFW and other generic drugs/medicines have been made live.
Unlimited RA Auto Extensions - Now there is NO limit on number auto-extensions allowed in reverse auctions, GeM recommends use of unlimited auto extension for best price discovery.
Bid opening from 3 days instead of 10 days only for central Gov & Central CPSE buyers and not applicable on BOQ and custom bids.
BID Life cycle from system has been removed from the system for all types of bids/RA.
Technical evaluator: Evaluation can be based on Single/Multiple evaluator(s) or self, selection for Tender Committee (TC) option shall also be available
Re-blocking of funds - Buyers will now be able to block funds which they had not done at the time of order placement due to reasons like change of financial years etc.
- New Functionalities on Services
L1 negotiation: Buyer now gets an option to negotiate with L1 discovered from the financial evaluation. In case service provider has uploaded the price breakup then service provider gets the option to upload revised price breakup after conducting their negotiations with the buyer.
MSE preference: If buyer has selected MSE preference in bid then buyer will get option to send price match request to MSE if Non MSE bidder is selected as L1 and MSE price quoted is within L1+X% (X as defined in bid) range. In case buyer has not opted for MSE preference then buyer needs to provide competent authority approval with detail of approving authority.
Minimum floor price: A new feature has made live to solve the above problem, minimum floor price feature is available for buyers to define the minimum floor price below which no service provider would be able to quote in bid. This feature will help buyers to get reasonable price offers in bids. This feature is available for all PSUs/CPSEs/State Buyers and MoD.
Online invoicing for services - In order to introduce end to end procurement on GeM Invoicing has been made live on GeM for service providers and buyers to streamline the complete process.
Invoice rejection by consignee - Once the invoice raised by service provider, consignee now has the feature to reject the invoice against some rejection reasons which will be visible to service provider. Based on the comments, service provider will be able to update the invoice and then submit again.
Provision to upload additional SLA and SOW and ATC - Buyer has provision to write or upload document files for all of above features which will further become part of bid document and contract document and service provider has to abide by that. The terms and condition, scope of work or SLA mentioned by buyer will supersede by default conditions mentioned in SLA of the service.
Price breakup - GeM has introduced the functionality where Buyer can request for Price Breakup, Format to be uploaded by buyer for the breakup of components on cost/price offered by Service Provider in the Bid. Format uploaded by buyer may be used by service provider as reference for providing financial breakup. L1 will be evaluated by system basis on lowest price offered. GeM restricts this document to be available only during financial evaluation step, buyer will be able to open this document after financial will be open.
Custom filter for buyer - GeM has introduced feature to choose “Others” option from the list of values of technical parameters in case desired parameter is not available. Buyer has to select “Intent of Buying” as “Bid” to enter the Customized Requirement.
GeM system maintenance activity is planned from 25/06/2022 9:00 PM until 26/06/2022 12:00 Noon. While we will work towards avoiding any outages, the system may be unstable intermittently. As a preventive measure, you are requested to either prepone or postpone Bid related activities such as Bid creation, Evaluation, Seek Clarification, Reply Representation and Negotiations etc, to other dates as per your convenience. Also, you may like to avoid keeping Bid end date and Bid Opening dates on or near these dates if feasible. Please note, during this period Buyers can access all previous and ongoing Bid/RA status and details from their panel.
Forward Auction is a new feature addition into GeM platform enabling integrated B2B (Business to Business) and B2C (Business to Customer) auction featuring pan India auctioneers and bidders. As a GeM registered buyer, user can create “Auction” to sell off goods/materials/immovable assets within GeM portal using Forward Auction application and can reach out pan India bidders at a larger scale. To know more, click here
Advanced Search- https://bidplus.gem.gov.in/advance-search
Please click here to view the service approval process flow.
"Buyer Selected Non-Golden Parameters are now mandatory Bid requirement” - Buyers can now choose both Golden and Non-Golden Parameters for defining the Bid Requirements. This will enable Buyers to impose a non-golden parameter as a mandatory specification for their Bids.

All Golden parameters of the category and only those non-Golden parameters which Buyer has selected while creating bid (with values as selected by the Buyer or better than that), will now form part of the overall item specifications in Bid and will be published in the Bid document. Please note that the Non-Golden Parameters which are not specifically selected by the Buyer will now be discarded from bid and will not be published in bid and Sellers can offer a product with any of the allowed values for such non-golden parameters. If buyer want to make any non-golden parameter a part of bid, he must select that parameter and select its allowed values while creating bid, else GeM system would presume that buyer has no specific choice for that parameter and will accept any value for that parameter. No bid can then be rejected for such non selected parameter.
It is also to be noted that the values of the reference product are no longer part of the bid and only allowed values will be part of bid. For Golden parameters, by default GeM would incorporate all values that are better than the reference product's values in the bid. Buyer can select and allow any more values that he feels appropriate so that the bid is as generic as possible to attract maximum competition. Similarly for Buyer chosen non-golden parameters also, reference product's value and better values would be allowed by default and Buyer can add more values of his choice.
Sellers would now need to mandatorily comply with complete Bid specifications to proceed with Bid participation. Since bidders will now be pre-filtered and allowed to offer only those products which are matching with allowed values of Golden as well as non-Golden parameters (Buyer selected), there would now be no need for Buyer's to check or reject any bid on the ground of specification mis-match as far as GeM catalogues are concerned.

Please be informed that all the buyers registered on the GeM portal have to update the GSTIN details mandatorily. You may log into your buyer account and get the option to update GSTIN under the "My Account" section. Also please note that if you do not have a GSTIN number, you will have to give acceptance to the declaration that you are not liable to fall under the ambit of GST on your buyer dashboard.

Request you to please do the needful at the earliest.

Incident management policy has been revised, please click here to view the new policy.
Please click here to see the important updates about the Payments OM
As per the OM issued by the Department of Expenditure, Ministry of Finance (No.F.6/18/2019.PPD), the following provisions have been enabled on GeM -

Proof of Delivery Submission

The system would not allow the seller to generate an invoice, if the delivery period of an order has passed. The sellers must also submit the proof of their delivery to the consignee's location before the delivery date of the orders has passed, for their shipments to be eligible for Auto PRC and Auto CRAC
Auto PRC and Auto CRAC

Auto PRC

In case if the seller has submitted the proof of delivery before the order's delivery date has passed, their shipments would be eligible for auto PRC. This means that if the consignee does not generate the PRC within 4 days from the date of delivery as per the proof of delivery submitted by the seller, then the system would generate an auto PRC, marking all the shipped quantities as PRC accepted. At this point, the consignee would have 2 more days to make any modifications. In case, if still no action has been taken by the consignee within these 2 days, then this system generated auto PRC would be considered as the final PRC which could no longer be modified.
Auto CRAC

In case if the seller has submitted the proof of delivery before the order's delivery date has passed and the final PRC is also completed (through the system or by the consignee), then their shipments would be eligible for auto CRAC. This means that if the consignee has not generated the CRAC within 10 days from the date of delivery as per the proof of delivery submitted by the seller, then the system would generate an auto CRAC, marking all the PRC quantities as CRAC accepted. At this point, the consignee would have 3 more days to make any modifications. In case, if still no action has been taken by the consignee within these 3 days, then this system generated auto CRAC would be considered as the final CRAC which could no longer be modified.
Supplementary Invoice

For product orders where the consignee has made some rejections at the PRC or CRAC stage, the sellers would now have an option to issue a supplementary invoice against these rejected quantities. This option would be available to the seller before the delivery date of the order has passed.

For more information on the OM, please click here.

All transactions on Gem 2.0 can be accessed here.

Home

Musical Instruments and Games and Toys and Arts and Crafts and Educational Equipment and Materials and Accessories and Supplies

Developmental and professional teaching aids and materials and accessories and supplies

Technology Teaching Aids and Materials

TERA Package 1 - Robotics and Electro - Mechanical Components (ASoSE) (Q3 Category)

NEOROBOS A set of Training Equipment for Robotics and Automation (TERA) Package-1 Robotics and Electro-Mechanical Components

NEOROBOS^R

(Package 1 Mechanical Components)

Product Details

Our Price: ₹120,000.00

72%

You Save: ₹312,610.00 (72%)

Price For : 1 set

MRP/Unit: ₹432,610.00

Offer Price/Unit: ₹120,000.00

Availability: 4508750 In Stock

Min. Qty. Per Consignee: 1

Product id: 5116877-28451038891

Country Of Origin: India

Local Content (MII): 100%

*Please Note: Local Content value is as declared by reseller since OEM is not registered on GeM

Seller Details

Sold by: Resellers

Reseller not verified by OEM

Catalogue not verified by OEM

4.0 - 4.49

View All Sellers

₹120,000.00

Specifications

Component 1 1 Set of Joystick (Specification: Operating Voltage (VDC): 4.75 ~ 5.25, X co-ordinate min 206 to max 798, typical 516 Y co-ordinate min 203 to max 797, typical 507)

Component 2 1 Set of Accelerometer and Gyro Sensor (Specification: MPU-605Chip built-in 16bit AD converter, 16-bit data output, Driver Chip: MPU6050, Operating Voltage: 3-5V DC, Communication: I2C/IIC Protocol, Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g)

Component 3 2 Set of IR Sensor (Specification: Detection distance: 2 ~ 30cm, Detection angle: 35 °, Comparator chip: LM393, 3mm screw holes for easy mounting)

Component 4 2 Set of Ultrasonic Sensor (Specification: Operating Voltage (VDC):5, Average Current Consumption (mA): 2, Frequency (Hz): 40000, Sensing Angle: 15Â°, Max. Sensing Distance (cm): 450, Weight (gm): 9, Sensor Cover Dia. (mm): 16)

Component 5 1 Set of PIR Motion Sensor (Specification: Operating Voltage (VDC): 4.5 ~ 20, Average Current Consumption (mA): 0.06 Distance Measuring Range (CM): 300 ~ 700, Output Type: (High/ Low-level Signal) 3.3V TTL output, Working Temperature Range (°C): -20 to 80)

Component 6 1 Set of Temp. Sensor (Specification: Supply Voltage DC: 2.2 – 5.5V, Measuring Range Temperature: -40~+80°C; Humidity: 0~100%RH; Excellent long-term stability; Digital output, I²C interface; Quick response)

Component 7 1 Set of Soil Moisture Sensor (Specification: Dual output mode, analog output more accurate; A fixed bolt hole for easy installation; With power indicator (red) and digital; switching output indicator (green); Having LM393 comparator chip, stable.; Operating Voltage: 3.3V~5V; Soil Probe Dimension: Approx. 6cm x 3cm; Cable Length (cm): 20)

Component 8 1 Set of Gas detector Sensor (Specification: Operating Voltage: +5V; Preheat Duration:20 s; Analog Output Voltage:0 to 5 V Dimension:36x20x21 mm; Digital Output Voltage: 0V or 5V (TTL Logic); Preheat Duration(sec): 20; Dimensions in mm (LxWxH): 36x20x21)

Component 9 1 Set of Trimmer Potentiometer (Specification: Resistance (Ω): 10k; Tolerance(%): 30; Operating Temperature Range (°C): -10 to 70; Mounting Type: Through Hole; Length (mm): 7; Width (mm): 6.5; Height (mm): 5; Weight (gm): 0.1 (approx) (each))

Component 10 1 Set of Mini micro submersible water pump (Specification: DC voltage: 2.5-6V; Maximum lift: 40-110cm; Flow rate: 80-120L/H; Outer diameter of effluent: 7.5mm; Height: 33mm; Length: approx. 45 mm; Diameter: approx. 24mm Flow rate: 80-120L/H; Maximum lift: 40-110cm; The inner diameter of the water outlet: 4.7 mm)

Component 11 4 Set of Wheel 65mm (Specification: Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side); Wheel Diameter(mm): 65; Wheel Width(mm): 26)

Component 12 4 Set of BO Wheel 70mm (Specification: Shaft Diameter (mm): 6; Wheel Diameter(mm): 70; Wheel Width(mm): 40)

Component 13 1 Set of Water flow measurement sensor (Specification: Working Flow Rate : 1 to 30 Liters/Minute; Operating Temperature (°C): -25 ~ +80; Humidity measuring range: 35% – 80% RH; Maximum water pressure: 2.0 MPa Output duty cycle: 50% ±10%; Pulses per Liter: 450; Cable length (cm): 15; Outer diameter (mm): 20)

Component 14 1 Set of LED Matrix4 in 1 display (Specification: Driver Chip: MAX7219; Input Voltage: 3.7 to 5.3 V; Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm; PCB Dimensions: 128×32 (LxW) mm)

Component 15 1 Set of Switch keyboard (Specification: Ultra-thin design & adhesive backing provides easy integration to any project Excellent price-performance ratio; Easy communication with any microcontroller; 5 pins 2.54mm pitch connector, 4x 4type 16 keys.; Sticker can peel off for adhesive mounting.; Operating Voltage (V): 5 DC)

Component 16 1 Set of Bluetooth Module with button (Specification: Bluetooth protocol: Bluetooth Specification v2.0 + EDR.; Frequency: 2.4GHz ISM band.; Modulation: GFSK(Gaussian Frequency Shift Keying).; Emission power: =4dBm, Class 2.; Sensitivity: =-84dBm at 0.1% BER.)

Component 17 2 Set of BO Motor straight (Specification: Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction; Operating Voltage(VDC): 3~12; Shaft Length (mm): 8.5; Shaft Diameter (mm): 5.5 (Double D-type); No Load Current: 40-180mA; Rated Speed(After Reduction): 140 RPM; No Load Current (mA): 40-180mA. Rated Speed After Reduction (RPM): 300; Rated Torque (Kg-Cm): 0.35; Dimensions in mm (LxWxH): 65 x 23 x 27)

Component 18 1 Set of Motor driver module (Specification: Logical voltage: 5V; Drive voltage: 5V-35V; Logical current: 0-36mA; Drive current: 2A (max. single bridge); Max power: 25W; Dimensions: 44 x 44 x 28 (LxWxH)mm)

Component 19 1 Set of Servo motor (SG90) (Specification: Model: SG90; Weight: 9 gm; Operating voltage: 3.0V~ 7.2V; Servo Plug: JR Stall torque @4.8V : 1.2kg-cm; Stall torque @6.6V : 1.6kg-cm; Operating Temperature (°C): -30 to 60; Dead Band Width ( μs): 7; Gear Type: Glass Fiber)

Component 20 1 Set of Stepper Motor (D Type shaft) (Specification: Step Angle: 1.8°; Current: 1.5 A /Phase; Holding Torque: 5.5 kg-cm. Detent Torque: 2.6 kg-cm; Weight – 360 gm; Resistance (Ω): 2.8; Weight (gm): 363; Dimensions (mm) LxWxH: 42 X 42 X 72mm; Detent Torque (kg-cm): 2.6; Frame Size (mm): 42 x 42)

Component 21 1 Set of Breadboard (Specification: 400 tie points; 2 Power lanes, Total 100 tie points in power lanes; 1 Double strip, Total 300 tie points; Perfect for Arduino shield prototyping and testing; Plastic housing, metal contact clips)

Component 22 1 Set of Lithium Polymer battery (2200 mAh) (Specification: Model No. 2200mAh 3S 25C; Connecting Mode: 3S-1P; Connector Type: XT60; Nominal Capacity (mAh): 2200mAh at 0.2C; Minimum capacity: 2107mAh at 0.2C; Nominal Voltage (V): 11.1V (Cell 3.7V); Open-Circuit Voltage: 12.45 to 12.60V (Cell 4.15 to 4.20V); Charging time: Rapid charge: 1.5hours(2.2A) Standard Charging: 7.5 hours(0.44A))

Component 23 1 Set of Buzzer (Specification: Material: ABS plastic; Color: Red-black; Length of Wire: 1m; Sound Level: 110dB; Voltage: 12V)

Component 24 1 Set of Transistor (Specification: Collector-Base Voltage (Vcb) (V): 75; Collector-Emitter Voltage (Vce) (V): 40; mitter-Base Voltage (Veb) (V): 6; Collector Current (DC) (A): 600m; Junction Temperature (°C): -55 to +150; Storage condition (℃): -55 to 150)

Component 25 1 Set of Linear Voltage Regulator (Specification: Output Current up to 1A; Output Voltages of 5V; Thermal Overload Protection; Short Circuit Protection)

Component 26 1 Set of Capacitor Assorted Kit (Specification: Resistance: 1M Ohm; Tolerance: 1%; Max. Working Voltage: 250V; Temperature Coefficient of Resistance: 50PPM/°C)

Component 27 1 Set of LED Assortment Kit (Specification: All in one 3mm LED Assortment Kit (1000pcs) by Plusivo PLUS an additional pack of 220 Ω Resistors and a Printed Circuit Board)

Component 28 1 Set of Metal Film Resistor (Specification: Resistance: 470 Ohm; Max. Working Voltage: 350 V; Tolerance: 1%; Temperature Coefficient of Resistance: 50 PPM/°C; Operating Temperature Range: -40ºC to 125ºC)

Component 29 1 Set of Digital Multimeter (Specification: Display 3-1/2 Digit LCD display; Battery 9V Battery (6F22 or 1604A Type); Operating temperature and Humidity 0 to +40°C (+32°F to +104°F) and <80% RH; Storage temperature and Humidity -10°C to +50°C (+14°F to +122°F) and <70%RH; Safety Class IEC 61010-1, CAT II 600V)

Component 30 1 Set of Silicon Wire (Specification: Colors: Red, Blue, White; Core Type: Pre-Tinned Stranded; Voltage Rating:600 V Silicone Wire Length (FT):30; Soft and Flexible Silicone Insulation)

Component 31 1 Set of Soldering Iron with Solder Wore (Specification: All in one Soldering Kit For Electronics by Plusivo; Plug Type: EU; Complete Soldering Kit: It includes the complete soldering tools for various uses, from home DIY, electrical repairs jobs and other soldering projects; Wattage(W): 60 W; Max. Temperature: 450 C)

Component 32 1 Set of Wire stripper and cutter (Specification: Product Stanley Wire Stripper (Cutter); It made up of high-quality materials; Length 130 mm)

Component 33 4 Set of Mecanum Wheels (Specification: Diameter: 60 mm; Body Material: Aluminum; Roller material: Nylon+TPR; Spacer material: Aluminum; Length of roller: 30 mm.)

Component 34 1 Set of LCD Display (Specification: Based on ST7920; Resolution: 128 X 64 pixels; Operating voltage: 5V; Viewing Area: 72mm x 40mm; Display mode TN/STN)

Component 35 1 Set of 40 pin Dupont Cable (Specification: Length: 1 Meter; Weight: 130 gm; Conductor Material: Copper; Compatible with 2.54mm spacing pin headers; High quality and in good working condition; Durable and reusable; Easy to install and use)

Component 36 3 Set of Mini servo Motor (Specification: Model: SG92R; Weight: 9 gm; Operating voltage: 3.0V~ 7.2V; Servo Plug: JR Stall torque @4.8V : 2.5kg-cm)

Component 37 1 Set of Stepper motor driver (Specification: Supply Voltage: 8.2 – 42 VDC; Current Capacity : 2.2A max(24V); Continuous current per phase: 1.5 A; Minimum Logic voltage: 2.5V; Maximum Logic Voltage: 5V)

Component 38 1 Set of Linear voltage regulator (Specification: Output Current up to 1A; Output Voltages of 5V; Thermal Overload Protection; Short Circuit Protection; No. of Output: 1; Output Type: Digital; Polarity: Positive; Input Voltage Range: 3V – 35V; Output Voltage(V): 5; Max. Output Current (A): 1; Operating Temperature Range (°C): -40 to 85)

Component 39 1 Set of Lithium Polymer Battery (1000 mAh) (Specification: Model No: ORANGE 1300/ 4S-100C; Capacity : 1300 mAh. Weight: 165 gm; Voltage: 14.8 V; Dimensions : 33 x 34 x 75(mm ); Max Continuous Discharge : 100 C(130 A); Balance Plug: JST-XH.)

Component 40 10 Set of SPST Rocker Switch (Specification: Switch Type: SPST; Contact resistance: <50mΩ; Insulation resistance: >100MΩ Dielectric resistance: >1500VAC / 1 min)

Component 41 1 Set of Digital LDR Module (Specification: LDR module 4 PIN; Operating voltage 3.3V-5V; Signal output indicator light. LDR module 4 PIN; Able to detect ambient brightness and light intensity Adjustable; sensitivity (via blue digital potentiometer adjustment))

Component 42 1 Set of Arduino UNO with cable (Specification: Microcontroller Chip: ATmega328; Operating Voltage (VDC): 5; Input Voltage(Recommended): 7-12V; Input Voltage (limit): 6-20V; Analog I/O Pins: 6; Digital I/O Pins: 14 (of which 6 provide PWM output); PWM Digital I/O Pins: 6; DC Current for 3.3V Pin (mA): 50; DC Current per I/O Pin (mA): 40; Clock Speed: 16 MHz; SRAM: 2; EEPROM: 1 KB (ATmega328); Flash Memory: 32 KB; On Board LEDs: On/Off, L (PIN 13), TX, RX)

Component 43 1 Set of Battery holder (Specification: Holds 4 AA batteries; Easy install, convenient to use; Dimensions mm (LxWxH): 62 x 58 x 15; Material: Plastic; Internal Connection: Series)

Component 44 1 Set of Battery with connector (Specification: 9V DC Battery; Excellent material; It is an environmental 9V battery buckle The Cable Length: 12cm Approx; Convenient for connecting a battery to your application)

Component 45 1 Set of Digital Electronic Microscope (1200x12MP) (Specification: G1200, 1200x12MP, Display Screen - 7″ HD LCD; Length-205mm, Width-160mm, Height-80mm. Shipment Dimensions: 240mmx210mmx80mm)

Component 46 1 Set of Measuring Tape 5M (Specification: Blade Length: 5 m; Blade Width: 16 mm; Item Code: ELC516)

Component 47 1 Set of Screw Driver set (Specification: Fat Head: 3mm, 5mm & 6mm; Phillips’s head: 0, 1 & 2 point; Material: Sturdy transparent PVC handle with a neon bulb)

Component 48 1 Set of Stripper (Specification: Product Stanley Wire Stripper (Cutter); It made up of high-quality materials Length 130 mm)

Component 49 1 Set of Multipurpose PCB Ruler (Specification: Measuring length: 15 cm; Commonly used IC package: 1.SSOP16, 2.QFN32, 3.SOP16, 5.QFP32 4.TSSOP28; Common hole diameter reference size (MIL) for hanging a slot; 28 to 8 AWG hole on Scale Multipurpose ruler Scale; Gold plated Drawing; Hard PCB material; Length (mm): 155; Width (mm): 25; Height (mm): 1.5)

Component 50 1 Set of Omni Wheel (Specification: Diameter: 58mm; Roller Diameter: 13mm; Body Material: Nylon; Roller Material: Nylon+PE; Load capacity: 3KG; Roller Material: Nylon + PE)

Features

CONFORMITY

Description of Stores

Training Equipment for Robotics and Automation (TERA) Package-1 Robotics and Electro-Mechanical Components

Robotics and Electro-Mechanical Components

Set of Joystick, Accelerometer and Gyro Sensor, IR Sensor, Ultrasonic Sensor, PIR Motion Sensor, Temp. Sensor, Soil Moisture Sensor, Gas detector Sensor, Trimmer Potentiometer, Mini micro submersible water pump, Wheel 65mm, BO Wheel 70mm, Water flow measurement sensor, LED Matrix4 in 1 display, Switch keyboard, Bluetooth Module with button, BO Motor straight, Motor driver module, Servo motor (SG90), Stepper Motor (D Type shaft), Breadboard, Lithium Polymer battery (2200 mAh), Buzzer, Transistor, Linear Voltage Regulator, Capacitor Assorted Kit, LED Assortment Kit, Metal Film Resistor, Digital Multimeter, Silicon Wire, Soldering Iron with Solder Wore, Wire stripper and cutter, Mecanum Wheels, LCD Display, 40 pin Dupont Cable, Mini servo Motor, Stepper motor driver, Linear voltage regulator, Lithium Polymer Battery (1000 mAh), SPST Rocker Switch, Digital LDR Module, Arduino UNO with cable, Battery holder, Battery with connector, Digital Electronic Microscope (1200x12MP), Measuring Tape 5M, Screw Driver set, Stripper, Multipurpose PCB Ruler, Omni Wheel

COMPONENTS

Component 1	1 Set of Joystick (Specification: Operating Voltage (VDC): 4.75 ~ 5.25, X co-ordinate min 206 to max 798, typical 516 Y co-ordinate min 203 to max 797, typical 507)
Component 2	1 Set of Accelerometer and Gyro Sensor (Specification: MPU-605Chip built-in 16bit AD converter, 16-bit data output, Driver Chip: MPU6050, Operating Voltage: 3-5V DC, Communication: I2C/IIC Protocol, Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g)
Component 3	2 Set of IR Sensor (Specification: Detection distance: 2 ~ 30cm, Detection angle: 35 °, Comparator chip: LM393, 3mm screw holes for easy mounting)
Component 4	2 Set of Ultrasonic Sensor (Specification: Operating Voltage (VDC):5, Average Current Consumption (mA): 2, Frequency (Hz): 40000, Sensing Angle: 15Â°, Max. Sensing Distance (cm): 450, Weight (gm): 9, Sensor Cover Dia. (mm): 16)
Component 5	1 Set of PIR Motion Sensor (Specification: Operating Voltage (VDC): 4.5 ~ 20, Average Current Consumption (mA): 0.06 Distance Measuring Range (CM): 300 ~ 700, Output Type: (High/ Low-level Signal) 3.3V TTL output, Working Temperature Range (°C): -20 to 80)
Component 6	1 Set of Temp. Sensor (Specification: Supply Voltage DC: 2.2 – 5.5V, Measuring Range Temperature: -40~+80°C; Humidity: 0~100%RH; Excellent long-term stability; Digital output, I²C interface; Quick response)
Component 7	1 Set of Soil Moisture Sensor (Specification: Dual output mode, analog output more accurate; A fixed bolt hole for easy installation; With power indicator (red) and digital; switching output indicator (green); Having LM393 comparator chip, stable.; Operating Voltage: 3.3V~5V; Soil Probe Dimension: Approx. 6cm x 3cm; Cable Length (cm): 20)
Component 8	1 Set of Gas detector Sensor (Specification: Operating Voltage: +5V; Preheat Duration:20 s; Analog Output Voltage:0 to 5 V Dimension:36x20x21 mm; Digital Output Voltage: 0V or 5V (TTL Logic); Preheat Duration(sec): 20; Dimensions in mm (LxWxH): 36x20x21)
Component 9	1 Set of Trimmer Potentiometer (Specification: Resistance (Ω): 10k; Tolerance(%): 30; Operating Temperature Range (°C): -10 to 70; Mounting Type: Through Hole; Length (mm): 7; Width (mm): 6.5; Height (mm): 5; Weight (gm): 0.1 (approx) (each))
Component 10	1 Set of Mini micro submersible water pump (Specification: DC voltage: 2.5-6V; Maximum lift: 40-110cm; Flow rate: 80-120L/H; Outer diameter of effluent: 7.5mm; Height: 33mm; Length: approx. 45 mm; Diameter: approx. 24mm Flow rate: 80-120L/H; Maximum lift: 40-110cm; The inner diameter of the water outlet: 4.7 mm)
Component 11	4 Set of Wheel 65mm (Specification: Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side); Wheel Diameter(mm): 65; Wheel Width(mm): 26)
Component 12	4 Set of BO Wheel 70mm (Specification: Shaft Diameter (mm): 6; Wheel Diameter(mm): 70; Wheel Width(mm): 40)
Component 13	1 Set of Water flow measurement sensor (Specification: Working Flow Rate : 1 to 30 Liters/Minute; Operating Temperature (°C): -25 ~ +80; Humidity measuring range: 35% – 80% RH; Maximum water pressure: 2.0 MPa Output duty cycle: 50% ±10%; Pulses per Liter: 450; Cable length (cm): 15; Outer diameter (mm): 20)
Component 14	1 Set of LED Matrix4 in 1 display (Specification: Driver Chip: MAX7219; Input Voltage: 3.7 to 5.3 V; Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm; PCB Dimensions: 128×32 (LxW) mm)
Component 15	1 Set of Switch keyboard (Specification: Ultra-thin design & adhesive backing provides easy integration to any project Excellent price-performance ratio; Easy communication with any microcontroller; 5 pins 2.54mm pitch connector, 4x 4type 16 keys.; Sticker can peel off for adhesive mounting.; Operating Voltage (V): 5 DC)
Component 16	1 Set of Bluetooth Module with button (Specification: Bluetooth protocol: Bluetooth Specification v2.0 + EDR.; Frequency: 2.4GHz ISM band.; Modulation: GFSK(Gaussian Frequency Shift Keying).; Emission power: =4dBm, Class 2.; Sensitivity: =-84dBm at 0.1% BER.)
Component 17	2 Set of BO Motor straight (Specification: Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction; Operating Voltage(VDC): 3~12; Shaft Length (mm): 8.5; Shaft Diameter (mm): 5.5 (Double D-type); No Load Current: 40-180mA; Rated Speed(After Reduction): 140 RPM; No Load Current (mA): 40-180mA. Rated Speed After Reduction (RPM): 300; Rated Torque (Kg-Cm): 0.35; Dimensions in mm (LxWxH): 65 x 23 x 27)
Component 18	1 Set of Motor driver module (Specification: Logical voltage: 5V; Drive voltage: 5V-35V; Logical current: 0-36mA; Drive current: 2A (max. single bridge); Max power: 25W; Dimensions: 44 x 44 x 28 (LxWxH)mm)
Component 19	1 Set of Servo motor (SG90) (Specification: Model: SG90; Weight: 9 gm; Operating voltage: 3.0V~ 7.2V; Servo Plug: JR Stall torque @4.8V : 1.2kg-cm; Stall torque @6.6V : 1.6kg-cm; Operating Temperature (°C): -30 to 60; Dead Band Width ( μs): 7; Gear Type: Glass Fiber)
Component 20	1 Set of Stepper Motor (D Type shaft) (Specification: Step Angle: 1.8°; Current: 1.5 A /Phase; Holding Torque: 5.5 kg-cm. Detent Torque: 2.6 kg-cm; Weight – 360 gm; Resistance (Ω): 2.8; Weight (gm): 363; Dimensions (mm) LxWxH: 42 X 42 X 72mm; Detent Torque (kg-cm): 2.6; Frame Size (mm): 42 x 42)
Component 21	1 Set of Breadboard (Specification: 400 tie points; 2 Power lanes, Total 100 tie points in power lanes; 1 Double strip, Total 300 tie points; Perfect for Arduino shield prototyping and testing; Plastic housing, metal contact clips)
Component 22	1 Set of Lithium Polymer battery (2200 mAh) (Specification: Model No. 2200mAh 3S 25C; Connecting Mode: 3S-1P; Connector Type: XT60; Nominal Capacity (mAh): 2200mAh at 0.2C; Minimum capacity: 2107mAh at 0.2C; Nominal Voltage (V): 11.1V (Cell 3.7V); Open-Circuit Voltage: 12.45 to 12.60V (Cell 4.15 to 4.20V); Charging time: Rapid charge: 1.5hours(2.2A) Standard Charging: 7.5 hours(0.44A))
Component 23	1 Set of Buzzer (Specification: Material: ABS plastic; Color: Red-black; Length of Wire: 1m; Sound Level: 110dB; Voltage: 12V)
Component 24	1 Set of Transistor (Specification: Collector-Base Voltage (Vcb) (V): 75; Collector-Emitter Voltage (Vce) (V): 40; mitter-Base Voltage (Veb) (V): 6; Collector Current (DC) (A): 600m; Junction Temperature (°C): -55 to +150; Storage condition (℃): -55 to 150)
Component 25	1 Set of Linear Voltage Regulator (Specification: Output Current up to 1A; Output Voltages of 5V; Thermal Overload Protection; Short Circuit Protection)
Component 26	1 Set of Capacitor Assorted Kit (Specification: Resistance: 1M Ohm; Tolerance: 1%; Max. Working Voltage: 250V; Temperature Coefficient of Resistance: 50PPM/°C)
Component 27	1 Set of LED Assortment Kit (Specification: All in one 3mm LED Assortment Kit (1000pcs) by Plusivo PLUS an additional pack of 220 Ω Resistors and a Printed Circuit Board)
Component 28	1 Set of Metal Film Resistor (Specification: Resistance: 470 Ohm; Max. Working Voltage: 350 V; Tolerance: 1%; Temperature Coefficient of Resistance: 50 PPM/°C; Operating Temperature Range: -40ºC to 125ºC)
Component 29	1 Set of Digital Multimeter (Specification: Display 3-1/2 Digit LCD display; Battery 9V Battery (6F22 or 1604A Type); Operating temperature and Humidity 0 to +40°C (+32°F to +104°F) and <80% RH; Storage temperature and Humidity -10°C to +50°C (+14°F to +122°F) and <70%RH; Safety Class IEC 61010-1, CAT II 600V)
Component 30	1 Set of Silicon Wire (Specification: Colors: Red, Blue, White; Core Type: Pre-Tinned Stranded; Voltage Rating:600 V Silicone Wire Length (FT):30; Soft and Flexible Silicone Insulation)
Component 31	1 Set of Soldering Iron with Solder Wore (Specification: All in one Soldering Kit For Electronics by Plusivo; Plug Type: EU; Complete Soldering Kit: It includes the complete soldering tools for various uses, from home DIY, electrical repairs jobs and other soldering projects; Wattage(W): 60 W; Max. Temperature: 450 C)
Component 32	1 Set of Wire stripper and cutter (Specification: Product Stanley Wire Stripper (Cutter); It made up of high-quality materials; Length 130 mm)
Component 33	4 Set of Mecanum Wheels (Specification: Diameter: 60 mm; Body Material: Aluminum; Roller material: Nylon+TPR; Spacer material: Aluminum; Length of roller: 30 mm.)
Component 34	1 Set of LCD Display (Specification: Based on ST7920; Resolution: 128 X 64 pixels; Operating voltage: 5V; Viewing Area: 72mm x 40mm; Display mode TN/STN)
Component 35	1 Set of 40 pin Dupont Cable (Specification: Length: 1 Meter; Weight: 130 gm; Conductor Material: Copper; Compatible with 2.54mm spacing pin headers; High quality and in good working condition; Durable and reusable; Easy to install and use)
Component 36	3 Set of Mini servo Motor (Specification: Model: SG92R; Weight: 9 gm; Operating voltage: 3.0V~ 7.2V; Servo Plug: JR Stall torque @4.8V : 2.5kg-cm)
Component 37	1 Set of Stepper motor driver (Specification: Supply Voltage: 8.2 – 42 VDC; Current Capacity : 2.2A max(24V); Continuous current per phase: 1.5 A; Minimum Logic voltage: 2.5V; Maximum Logic Voltage: 5V)
Component 38	1 Set of Linear voltage regulator (Specification: Output Current up to 1A; Output Voltages of 5V; Thermal Overload Protection; Short Circuit Protection; No. of Output: 1; Output Type: Digital; Polarity: Positive; Input Voltage Range: 3V – 35V; Output Voltage(V): 5; Max. Output Current (A): 1; Operating Temperature Range (°C): -40 to 85)
Component 39	1 Set of Lithium Polymer Battery (1000 mAh) (Specification: Model No: ORANGE 1300/ 4S-100C; Capacity : 1300 mAh. Weight: 165 gm; Voltage: 14.8 V; Dimensions : 33 x 34 x 75(mm ); Max Continuous Discharge : 100 C(130 A); Balance Plug: JST-XH.)
Component 40	10 Set of SPST Rocker Switch (Specification: Switch Type: SPST; Contact resistance: <50mΩ; Insulation resistance: >100MΩ Dielectric resistance: >1500VAC / 1 min)
Component 41	1 Set of Digital LDR Module (Specification: LDR module 4 PIN; Operating voltage 3.3V-5V; Signal output indicator light. LDR module 4 PIN; Able to detect ambient brightness and light intensity Adjustable; sensitivity (via blue digital potentiometer adjustment))
Component 42	1 Set of Arduino UNO with cable (Specification: Microcontroller Chip: ATmega328; Operating Voltage (VDC): 5; Input Voltage(Recommended): 7-12V; Input Voltage (limit): 6-20V; Analog I/O Pins: 6; Digital I/O Pins: 14 (of which 6 provide PWM output); PWM Digital I/O Pins: 6; DC Current for 3.3V Pin (mA): 50; DC Current per I/O Pin (mA): 40; Clock Speed: 16 MHz; SRAM: 2; EEPROM: 1 KB (ATmega328); Flash Memory: 32 KB; On Board LEDs: On/Off, L (PIN 13), TX, RX)
Component 43	1 Set of Battery holder (Specification: Holds 4 AA batteries; Easy install, convenient to use; Dimensions mm (LxWxH): 62 x 58 x 15; Material: Plastic; Internal Connection: Series)
Component 44	1 Set of Battery with connector (Specification: 9V DC Battery; Excellent material; It is an environmental 9V battery buckle The Cable Length: 12cm Approx; Convenient for connecting a battery to your application)
Component 45	1 Set of Digital Electronic Microscope (1200x12MP) (Specification: G1200, 1200x12MP, Display Screen - 7″ HD LCD; Length-205mm, Width-160mm, Height-80mm. Shipment Dimensions: 240mmx210mmx80mm)
Component 46	1 Set of Measuring Tape 5M (Specification: Blade Length: 5 m; Blade Width: 16 mm; Item Code: ELC516)
Component 47	1 Set of Screw Driver set (Specification: Fat Head: 3mm, 5mm & 6mm; Phillips’s head: 0, 1 & 2 point; Material: Sturdy transparent PVC handle with a neon bulb)
Component 48	1 Set of Stripper (Specification: Product Stanley Wire Stripper (Cutter); It made up of high-quality materials Length 130 mm)
Component 49	1 Set of Multipurpose PCB Ruler (Specification: Measuring length: 15 cm; Commonly used IC package: 1.SSOP16, 2.QFN32, 3.SOP16, 5.QFP32 4.TSSOP28; Common hole diameter reference size (MIL) for hanging a slot; 28 to 8 AWG hole on Scale Multipurpose ruler Scale; Gold plated Drawing; Hard PCB material; Length (mm): 155; Width (mm): 25; Height (mm): 1.5)
Component 50	1 Set of Omni Wheel (Specification: Diameter: 58mm; Roller Diameter: 13mm; Body Material: Nylon; Roller Material: Nylon+PE; Load capacity: 3KG; Roller Material: Nylon + PE)
Additional Requirement	NA

CERTIFICATIONS

Availability of Test Reports from Central Govt, /NABL/IL AC acredited Lab to prove conformity to the Specification	Yes. As per buyer requirement
Agreed to furnish all the certificates and test reports to buyer / consignee on demand	Yes. As per buyer requirement

Terms And Conditions

Click here to download Terms And Conditions